← Back to all articles HR

FTE Calculator: Full-Time Equivalent Formula and ACA Rules

A bar of ten worker silhouettes, some half-filled, adding up to a full-time equivalent figure

A full-time equivalent, or FTE, converts the hours of everyone on the payroll into the number of full-time people those hours would equal. Ten part-timers at 20 hours a week are 5.0 FTE if full time is 40 hours. The number matters for three reasons that use three slightly different formulas: budgeting and capacity planning (hours divided by a full-time schedule), the Affordable Care Act employer mandate (part-time hours divided by 120 a month, plus full-time headcount), and grant, tax-credit and loan programs that each define a full-time week their own way.

The calculator below runs all three methods at once from headcounts and average hours, shows whether you cross the 50-FTE Affordable Care Act line, and converts an FTE target back into hiring. Below it: each formula with a worked example, the ACA rules in detail, how to handle overtime, leave and seasonal staff, and the mistakes that make FTE counts disagree between HR, finance and the benefits broker. For the related capacity math, see team capacity planning.

FTE calculator

The standard method divides total hours by a full-time schedule (40 hours a week, 2,080 a year). The Affordable Care Act method counts anyone at 30 or more hours a week as one full-time employee and divides all other hours by 120 a month, capped at 120 per person. The small-business health care tax credit method uses 2,080 hours and rounds down. This tool is arithmetic, not legal or tax advice.

The basic FTE formula

One FTE is one person working a full-time schedule for the period. The general formula is:

FTE = total hours paid (or scheduled) in the period / hours one full-time employee works in the same period.

Over a year with a 40-hour week, the denominator is 2,080 hours (40 x 52). Over a month it is roughly 173.33 hours (2,080 / 12), and over a week it is 40. A person who works 20 hours a week is 0.5 FTE; three people at 32 hours are 2.4 FTE; a team of 12 full-timers and 6 half-timers is 15.0 FTE. The headcount is 18 but the capacity is 15.

The denominator is the only real choice in the formula, and it is where disagreements begin. A 37.5-hour week (common in hospitals, banks and the UK) gives 1,950 hours a year, so an employee at 30 hours is 0.8 FTE rather than 0.75. Public-sector bodies often use 2,087 hours, the federal government's figure, which averages the 2,080 and 2,096-hour years created by leap years and 53-pay-period years. Pick one denominator, write it into the budget assumptions and use it everywhere.

Three methods and when each applies

MethodFormulaFull time meansUsed for
Standard (budget and capacity)Total hours / (full-time weekly hours x weeks)Whatever the organization defines, usually 40 or 37.5 hours a weekHeadcount budgets, staffing ratios, productivity per FTE, grant reporting
Affordable Care Act employer mandateFull-time employees (30+ hours a week or 130 a month) + (part-time hours per month, capped at 120 each) / 12030 hours a weekDeciding whether an employer with 50 or more full-time equivalents must offer affordable coverage
Small-business health care tax creditTotal hours (max 2,080 per person) / 2,080, rounded down to a whole number; owners and family excluded2,080 hours a yearEligibility for the IRS credit (fewer than 25 FTEs and average wages under $34,100 for 2026, phasing out to zero at $68,200)
Paycheck Protection Program (historical)Hours per week / 40, capped at 1.0, or the simplified 1.0 / 0.5 split at 40 hours40 hours a weekLoan forgiveness in 2020 and 2021; still appears in audits
Federal government (OPM)Hours / 2,0872,087 hours a yearAgency staffing ceilings and budget justifications

The three that matter to most private employers are the first three. They can give different answers for the same workforce in the same month, because the ACA method counts anyone at 30 hours as a full 1.0 and caps part-time hours at 120 a month, while the standard method treats 30 hours as 0.75 and has no cap. An employer with 45 full-timers and 20 part-timers at 28 hours a week has 59.0 standard FTE but 45 + (20 x 121.3 capped at 120) / 120 = 65 ACA FTEs. Both are right; they answer different questions.

FTE for the Affordable Care Act

The employer shared responsibility provisions in Internal Revenue Code section 4980H apply to an applicable large employer (ALE), defined as one that employed an average of at least 50 full-time employees, including full-time equivalents, on business days in the preceding calendar year. The steps are set out in Treasury Regulation 54.4980H-2:

  1. For each calendar month of the prior year, count employees with 130 or more hours of service (the monthly equivalent of 30 a week). Those are full-time employees.
  2. For everyone else, add up their hours of service for the month, counting no more than 120 hours for any one person, and divide the total by 120. That is the number of full-time equivalents for the month.
  3. Add the two figures for each month, add the twelve monthly totals and divide by 12. Round down to the next whole number. If the result is 50 or more, the employer is an ALE for the current year.

Hours of service include paid leave, so vacation, sick and holiday hours count. Seasonal workers do not count toward ALE status if the workforce exceeded 50 for 120 days or fewer in the year and the employees over 50 were seasonal. Related companies under common ownership are aggregated under the controlled-group rules, so two 30-employee businesses with the same owner are one 60-employee ALE. Volunteers and bona fide independent contractors are excluded.

Being an ALE means offering minimum essential coverage to at least 95% of full-time employees and their dependents, or paying the section 4980H(a) penalty, and offering coverage that is affordable and provides minimum value, or paying the 4980H(b) penalty for each full-time employee who gets a premium tax credit. The penalty amounts are indexed each year: for plan years beginning in 2026 the 4980H(a) amount is $3,340 per full-time employee (after excluding the first 30) and the 4980H(b) amount is $5,010 (Revenue Procedure 2025-26); for 2027 they rise to $3,780 and $5,670 (Revenue Procedure 2026-22, May 4, 2026). Full-time equivalents count toward ALE status but not toward the penalty itself, which is assessed only on full-time employees. ALE status also triggers Forms 1094-C and 1095-C reporting for the year.

Worked examples

Example 1: a clinic budgeting nursing capacity. Six nurses at 40 hours, four at 36 hours (three 12-hour shifts) and three at 24 hours. Standard FTE with a 40-hour week: (6 x 40 + 4 x 36 + 3 x 24) / 40 = (240 + 144 + 72) / 40 = 11.4 FTE across 13 people. If the clinic's full-time week is 36 hours, as many hospitals define it for shift nurses, the same roster is 456 / 36 = 12.67 FTE. The nurse-to-patient ratio report will differ by over a full FTE depending on which denominator the finance system was set up with, which is why the denominator belongs in the written assumptions.

Example 2: a restaurant group testing the ALE line. Across three locations, 38 employees average 35 or more hours a week (full-time under the ACA), and 40 others average 22 hours. Monthly part-time hours: 40 x 22 x 52 / 12 = 3,813 hours, none capped (each is 95 hours, under the 120 cap). 3,813 / 120 = 31.8 FTEs. Total 38 + 31.8 = 69.8, rounded down to 69. The group is an ALE even though no single restaurant has 50 staff, because the three are a controlled group. Had it used the standard method with a 40-hour week it would have reported 38 + 22 = 60 FTE; the ACA figure is higher because 120 hours a month is a lower bar than 173.

Example 3: hiring to an FTE target. A support team is budgeted at 18.0 FTE and currently runs 14 full-timers and 5 part-timers at 24 hours: 14 + 5 x 0.6 = 17.0 FTE. The 1.0 FTE gap can be filled by one full-time hire, by moving three part-timers from 24 to 32 hours (3 x 0.2 = 0.6, not enough on its own), or by two more part-timers at 20 hours. The calculator shows the hours gap so the manager can choose between the options rather than defaulting to a full-time requisition.

Overtime, leave, seasonal and contract staff

Using FTE in headcount planning

FTE is the unit that lets a workforce plan compare teams with different mixes of full and part-time staff, and it is the unit that productivity ratios should use. Revenue per FTE, tickets per FTE and patients per nursing FTE all control for the fact that two 20-hour people are one unit of capacity. Headcount-based ratios reward teams that happen to hire full-timers.

Three practical rules. First, budget in FTE but approve requisitions in hours, so a 0.6 FTE opening can be filled by one 24-hour person or two 12-hour people. Second, track funded FTE, filled FTE and worked FTE separately: a team funded at 20.0, filled at 18.5 and working 21.2 (because of overtime) is understaffed, not overstaffed, and the three numbers show it. Third, when the organization changes its full-time week (from 40 to 37.5, say), restate the history, or every trend line will jump by 6.7% on the changeover date. The workforce planning template and capacity planning template use these three columns.

For ratio benchmarks, the commonly cited figure of one HR professional per 100 employees is a headcount ratio; the HR metrics guide covers how to compute it on an FTE basis so part-time-heavy workforces are not misread as under-resourced.

Why FTE counts disagree

Key takeaways

Frequently asked questions

How do you calculate FTE?

Add up the hours worked or paid by all employees in the period and divide by the hours one full-time employee works in that period. Over a year with a 40-hour week the divisor is 2,080; over a month about 173.33; over a week 40. Ten employees at 20 hours a week are 5.0 FTE. Pick one definition of full time and use it consistently.

What is 1 FTE in hours?

With a 40-hour week, 1 FTE is 40 hours a week, 173.33 hours a month or 2,080 hours a year. With a 37.5-hour week it is 1,950 hours a year, and the federal government uses 2,087. The Affordable Care Act defines full time as 30 hours a week or 130 hours a month for the employer mandate.

How many hours is 0.5 FTE?

Half of the full-time schedule: 20 hours a week or 1,040 hours a year where full time is 40 hours, and 18.75 hours a week where it is 37.5. Under the Affordable Care Act's 120-hour monthly divisor, 0.5 FTE is 60 hours a month, or about 14 hours a week.

How is FTE calculated for the ACA employer mandate?

For each month of the prior year, count employees with 130 or more hours as full time; total the hours of everyone else, counting at most 120 per person, and divide by 120; add the two numbers. Average the 12 monthly totals and round down. If the result is 50 or more, the employer is an applicable large employer for the current year and must offer coverage or face the section 4980H penalties.

Does FTE include part-time employees?

Yes. The point of the measure is to convert part-time hours into full-time equivalents. Two part-timers at 20 hours equal 1.0 FTE. For the Affordable Care Act, part-time hours are divided by 120 a month; for budgeting they are divided by the organization's full-time schedule.

What is the difference between FTE and headcount?

Headcount counts people; FTE counts full-time schedules' worth of hours. A team of 12 full-timers and 6 half-timers has a headcount of 18 and 15.0 FTE. Ratios such as revenue per employee are more comparable across teams when computed per FTE.

Do independent contractors count toward FTE?

No. Contractors are not employees and are excluded from FTE counts for budgeting, the Affordable Care Act and the small-business tax credit. Misclassified workers who are later treated as employees are added back, which can change whether an employer is an applicable large employer.

Does paid time off count in FTE?

For the Affordable Care Act, yes: hours of service include paid vacation, sick leave, holidays and jury duty. For budgets, a funded position is usually 1.0 FTE whether or not the person is on paid leave. Unpaid leave does not count as hours of service.

← Back to all articles