← Back to all articles HR

Prorated Salary Calculator: Partial Pay for Starts and Leave

A pay period calendar with the first six days shaded out and a partial paycheck amount beside it

A prorated salary is the share of a salaried employee's pay that covers part of a pay period: the first paycheck for someone who started on a Wednesday, the last one for someone who left on the 19th, a period with three days of unpaid leave, or the paycheck in which a raise took effect halfway through. The arithmetic is simple. The disagreements are about the denominator (working days, calendar days or hours), and about when the law allows a deduction from an exempt employee's salary at all.

The calculator below prorates a salary for any partial period using the three common methods side by side, handles a mid-period raise, and flags deductions that the Fair Labor Standards Act salary-basis rule does not allow. Below it: each method with the numbers, the exempt-employee rules in 29 CFR 541.602, how proration interacts with semi-monthly schedules, final-pay deadlines, and the policy language that stops the same question being argued every payroll. For the payroll calendar itself, see the 2027 payroll calendar.

Prorated salary calculator

The working-days method divides the period salary by the working days in that period (usually 10 for biweekly, 10 or 11 for semi-monthly); the calendar-days method divides by all days; the hourly method divides annual salary by 2,080 hours. Deductions from an exempt employee's salary are only permitted in the cases listed in 29 CFR 541.602(b); the tool flags the others. Not legal or tax advice.

Three methods, three answers

No federal rule dictates how to prorate a salary. The FLSA regulation on exempt employees says only that an employer may pay "a proportionate part of an employee's full salary for the time actually worked" in the first and last weeks, and that deductions for permitted full-day absences may be made "in accordance with the employee's regular rate" or by the hourly or daily equivalent of the salary. That leaves the method to policy, and three are in common use.

MethodFormulaStrengthWeakness
Working days in the periodPeriod salary x (days paid / working days in the period)Matches how people think about a week; standard for biweekly payrollSemi-monthly periods have 10, 11 or 12 working days, so the same absence costs different amounts in different months
Calendar days in the periodPeriod salary x (days employed / calendar days in the period)Simple; common for monthly payroll and in offer lettersPays for weekends; a Monday start in a 14-day period is 12/14, not 8/10
Annual daily or hourly rateSalary / 260 per day, or / 2,080 per hour, times days or hours paidConsistent all year; the daily rate never changesOver a year the 260-day rate slightly overpays in short months and underpays in long ones; 2026 has 261 weekdays and 2027 has 260

On a $78,000 salary paid biweekly ($3,000 a period), six working days of a ten-day period is $1,800 by working days, $1,714.29 by calendar days (8 of 14) and $1,800 by the 260-day rate ($300 a day). On a semi-monthly schedule ($3,250 a period) in a month half with 11 working days, six days is $1,772.73 by working days and $1,800 by the annual daily rate. The differences are small per event and large across a workforce, so the method should be written in the pay policy and applied identically to starts, exits and leave.

When you may and may not dock an exempt salary

Exempt employees under the FLSA executive, administrative and professional exemptions must be paid on a salary basis: a predetermined amount each pay period that is not reduced because of variations in the quality or quantity of work. The regulation, 29 CFR 541.602, lists the only deductions that preserve the exemption. Prorating outside the list risks the exemption for that employee and, if deductions are an actual practice, for everyone in the same job classification under the same manager.

SituationDeduction from salaryAuthority
First or last week of employmentAllowed; pay a proportionate part for days worked541.602(b)(6)
Full-day absence for personal reasons other than sickness or disabilityAllowed, full days only541.602(b)(1)
Full-day absence for sickness or disabilityAllowed only if the employer has a bona fide sick-pay plan, policy or practice, and the employee has not yet qualified or has exhausted the benefit541.602(b)(2)
Partial-day absenceNot allowed; may be charged against a leave bank, including driving the bank negative, but salary is paid in full541.602(a); DOL opinion letters FLSA2005-7, FLSA2009-18
Unpaid FMLA leaveAllowed in any increment, including hours541.602(b)(7); 29 CFR 825.206
Jury duty, witness duty, temporary military leaveNot allowed beyond offsetting fees received for that service541.602(b)(3)
Penalty for violating a major safety ruleAllowed, in good faith541.602(b)(4)
Unpaid disciplinary suspension for workplace conduct rule violationsAllowed, full days only, under a written policy applicable to all employees541.602(b)(5)
Employer has no work, closes for weather, or furloughs part of a weekNot allowed if any work is done in the week; a full-week furlough with no work can be unpaid541.602(a)(2); DOL opinion letter FLSA2009-2
Reduction in quality or quantity of workNot allowed541.602(a)(1)

The safe-harbor provision in 541.603(d) lets an employer keep the exemption despite improper deductions if it has a clearly communicated policy prohibiting them with a complaint mechanism, reimburses employees, and makes a good-faith commitment to comply. Put that language in the handbook; it is the cheapest protection in wage and hour law. States add rules: California, for example, requires salaried exempt employees to earn at least twice the state minimum wage for full-time work and treats partial-day deductions from leave banks for absences of less than four hours with caution after Conley v. PG&E (2005), and several states prohibit the disciplinary-suspension deduction. None of this applies to non-exempt salaried employees, who may be paid only for hours worked as long as overtime is calculated correctly.

Common cases: start, exit, leave, raise

Semi-monthly and monthly schedules

Semi-monthly periods (1st to 15th, 16th to end of month) contain between 10 and 12 working days, so the working-days method produces a different daily value in almost every period: $3,250 / 10 = $325, / 11 = $295.45, / 12 = $270.83. Employees notice when the same two-day absence costs $650 in one month and $541.67 in another. Three ways to handle it:

  1. Use the annual daily rate (salary / 260) for all deductions and partial periods. Consistent, easy to explain, and the small annual drift is immaterial. 2026 has 261 weekdays, 2027 has 260; neither is wrong as a divisor as long as the policy names it.
  2. Use calendar days, which is what most monthly payrolls do. A $6,500 monthly salary prorated for a start on the 20th of a 30-day month is $6,500 x 11 / 30 = $2,383.33. It pays weekends, which is fine because the salary covers them anyway.
  3. Keep working days but define a standard period of 86.67 hours (2,080 / 24) and deduct hours at salary / 2,080. This is the method most payroll systems default to for semi-monthly salaried staff.

For the full list of which states allow which frequencies for which employees, see pay frequency laws by state; several states that permit semi-monthly pay for exempt staff require more frequent pay for hourly workers.

Final pay deadlines

The prorated final check has a deadline that varies by state and by whether the employee quit or was dismissed. California requires immediate payment on termination and within 72 hours of a resignation without notice, with waiting-time penalties of a day's wages per day late up to 30 days under Labor Code 203. Colorado requires payment immediately on termination (or within 6 hours of the start of the next business day if payroll is off-site). Massachusetts requires payment on the day of discharge. Many states, including Texas (6 days after discharge) and New York (next regular payday), allow more time. Federal law sets no deadline beyond the next regular payday. The final paycheck laws by state table has every jurisdiction; the point here is that a prorating dispute is not a reason to hold the check. Pay the undisputed amount on time and correct any difference afterward.

Policy language that settles it

A short paragraph in the compensation policy or handbook prevents most arguments. It should state: (1) the proration method, for example "Partial pay periods for salaried employees are calculated by dividing the annual salary by 260 to obtain a daily rate and multiplying by the number of scheduled workdays paid"; (2) that exempt employees' salaries are reduced only as permitted by 29 CFR 541.602, with the safe-harbor complaint procedure; (3) how partial-day absences are handled (charged to PTO, salary unaffected); (4) the effective-date convention for raises and schedule changes; and (5) that holidays and paid leave in a partial period follow the same proration. Offer letters should repeat the first-paycheck proration method so the new hire's expectations match the check.

Worked examples

Example 1: new hire, biweekly. Salary $78,000, biweekly period pay $3,000, period has 10 working days, employee started Wednesday of the first week and worked 8 days. Working-days method: $3,000 x 8 / 10 = $2,400. Calendar-days method: started day 3 of 14, employed 12 days: $3,000 x 12 / 14 = $2,571.43. Annual daily rate: $300 x 8 = $2,400. Permitted deduction under 541.602(b)(6).

Example 2: three personal days, exempt, semi-monthly. Salary $96,000, semi-monthly $4,000, period has 11 working days, PTO exhausted, three full days off for a family matter. Working-days method: $4,000 x 8 / 11 = $2,909.09 (deduction $1,090.91). Annual daily rate: $96,000 / 260 = $369.23 a day, deduction $1,107.69, pay $2,892.31. Permitted under 541.602(b)(1) because the absences were full days. Had one of the three been a half day, the salary for that day could not be reduced.

Example 3: office closed for a storm. The same employee missed two days because the building was shut. No deduction from salary is permitted because the employee was ready to work and the employer lacked work; the employer may require the use of PTO for the closure days, but if the PTO bank is empty the salary is still paid in full. The calculator's exempt check returns the full $4,000.

Example 4: raise effective mid-period. Salary $60,000 rising to $66,000 effective day 6 of a 10-working-day biweekly period. Old rate: $2,307.69 x 5 / 10 = $1,153.85. New rate: $2,538.46 x 5 / 10 = $1,269.23. Period pay $2,423.08. If the employee is non-exempt and worked overtime in a week straddling the change, the regular rate for that week is the blended rate, not the new salary.

Key takeaways

Frequently asked questions

How do you calculate a prorated salary?

Take the salary for one pay period and multiply by the fraction of the period the employee is being paid for: working days paid divided by working days in the period, or calendar days employed divided by calendar days in the period. Alternatively, divide the annual salary by 260 for a daily rate or by 2,080 for an hourly rate and multiply by the days or hours paid. On $78,000 paid biweekly, six of ten working days is $1,800.

Can you prorate an exempt employee's salary?

Only in the situations listed in 29 CFR 541.602(b): the first and last weeks of employment, full-day absences for personal reasons, full-day sickness under a bona fide sick-pay plan, unpaid FMLA leave, safety-rule penalties and full-day disciplinary suspensions. Deductions for partial days, lack of work, closures or jury duty are not permitted and can destroy the exemption.

How is a prorated salary calculated for a new hire?

Pay a proportionate part of the period salary for the days worked. If someone starts on Wednesday of a biweekly period with 10 working days and works 8 of them, pay 8/10 of the period salary. The FLSA expressly allows this proportional payment in the first week of employment.

What is the daily rate for a salaried employee?

Most employers use annual salary divided by 260 (52 weeks x 5 days); $78,000 gives $300 a day. Some divide the period salary by the working days in that specific period, which varies between 10 and 12 for semi-monthly payroll. The hourly equivalent is salary divided by 2,080.

How do you prorate salary for unpaid leave?

For non-exempt employees, pay only the hours worked. For exempt employees, deduct only for full days of absence in the permitted categories, using the daily rate in the policy; unpaid FMLA leave may be deducted in any increment, including hours. Partial-day absences outside FMLA cannot reduce salary but may be charged to a leave bank.

How do you prorate a salary increase that starts mid-pay period?

Pay the days before the effective date at the old period salary rate and the days after at the new rate, both prorated by the same method. Many employers make raises effective on the first day of a pay period to avoid the split. A raise backdated into earlier periods is retro pay.

Is prorating by calendar days or working days better?

Working days match how employees think about a week and are standard for biweekly payroll; calendar days are simpler for monthly payroll. The annual daily rate (salary / 260) is the most consistent because it never changes with the length of the period. Any method is lawful if applied consistently and disclosed.

Can an employer dock pay when the office closes for weather?

Not for an exempt employee who worked any part of that week; the full salary is due because the absence was caused by the employer. The employer may require PTO to be used for the closure, but must pay the salary even if the bank is empty. Non-exempt employees need only be paid for hours worked, subject to state reporting-time pay rules.

← Back to all articles